Presidio Testing Capabilities for
Standard Commercial Ceramic Capacitors
Presidio provides high quality ceramic capacitors for a wide variety of commercial applications. Every component must pass the test criteria listed below.
Quality Assurance Provisions
Every lot undergoes the following inspection and tests:
Capacitance: All parts are tested at 25°C and 1 VACRMS in accordance with method 305 of
MIL-STD 202. Y5V and low voltage parts follow EIA guidelines.
Dissipation Factor (DF): Refer to the latest version of Presidio's Ceramic Chip Capacitors catalog.
Dielectric Withstanding Voltage (DWV): All parts are tested to EIA/MIL standards.
Insulation Resistance (IR @ 25°C): All parts are tested at 25°C and rated voltage in accordance with method 302 of MIL-STD-202. The minimum IR required is 100,000 megohms or 1,000 megohm-microfarads.
Visual: Performed on pieces in accordance with Presidio internal workmanship criteria.
Mechanical: Level 1 AQL 1% in accordance with Presidio's catalog.
Example Part Number:0805BX103K2P3
Part number follows basic guidelines established in the Part Number Definitions portion of this website.
Presidio Components, Inc., has been an industry leader in the manufacture of ceramic capacitors since 1980. We provide high quality commercial capacitors, military capacitors, space capacitors, high temperature capacitors, pulse energy capacitors for EFI detonators, microwave capacitors and RF capacitors, as well as custom capacitors. Our custom products include nonstandard part sizes and voltages, including high voltage, high temperature, high "Q", custom leads, cryogenic ceramics, negative and positive temperature characteristic ceramics and piezoelectric formulations. We have a series of patented microwave and radio frequency products including patented single layer and broadband DC blocking caps. Call Presidio at (858) 578-9390.